How to Connect the Controller to the Injurymat Infrared Therapy Device
Connect the Controller to power using the power cable (1),
then connect the Controller to the Injurymat Infrared Therapy Device using the USB-C cable (2).
How to Wear the Injurymat Infrared Therapy Device
User Techniques
Wearing the Injurymat Infrared Therapy Device
- Connect the Controller to power and to the Injurymat Infrared Therapy Device.
- Check the LED power indicator on the Controller.
- Ensure the infrared light on the device is functioning.
- Select the desired mode and timing.
- Position the Injurymat device on the target area as directed.
Suggested Timing
For Treatments
- Choice: 30, 60, 90, 120 minutes
- 30 minutes, minimum treatment.
- 120 minutes maximum treatment time.
Suggested Intensity Setting
For Treatments
- Begin with low-intensity settings.
- Use high-intensity settings for more serious injury treatments; however, revert to low intensity if any discomfort occurs.
- The targeted area should be exposed during treatment as the therapy is focused on direct contact with the skin.
Simultaneously targeting two areas of the body
- Connect the controller to power.
- Connect the controller to 2 Injurymat Infrared Therapy Devices using the 2 USB-C output ports.
- Check the LED power indicator on the controller and the infrared lights on both devices.
- Select the desired mode and timing (both Injurymat devices will use the same mode and timing settings on the controller).
- Position the Injurymat Infrared Therapy Devices on the targeted areas.
